I have recently been looking for a Cake Stand to display my cakes in after baking and came across this Omada Design Tray with a Domed Lid.
The cake stand is made from acrylic plastic and splits into two pieces.
The base has a white coating on the bottom (similar to the finish of a plastic chopping board - this does not come off) and the lid is domed.
The domed lid size is slightly tricky to measure because of the dome part; however, here is the best spec I can get for you.
Or you could stack regular cupcakes (with no topping) on top of one another to contain more.
You can see from the picture that there is a dip in the lid where the handle is.
Packaging
The cake stand came in a brown box with a plastic bag around the lid to prevent scratching or rubbing inside. I binned the exterior box and removed the packaging. I then washed it in hot soapy water and dried it with a piece of kitchen towel. (According to the product info online it is dishwasher safe).The cake stand is made from acrylic plastic and splits into two pieces.
The base has a white coating on the bottom (similar to the finish of a plastic chopping board - this does not come off) and the lid is domed.
Size
The size of the base is as follows:- The full base is approximately 32.5 cm x 32.5 cm from edge to edge.
- The inner-circle (the white part) is approx 27 cm across.
- The base of the lid is approximately 26.5 cm across.
The domed lid size is slightly tricky to measure because of the dome part; however, here is the best spec I can get for you.
- If measured with a tape measure, and bending across the dome, the height is approximately 12 cm.
- If measured with a straight ruler, it's between 10.5 - 11 cm.
Handle
- This is approximately 5 cm across.
Colour
The cake stand comes in a multitude of colours such as- Red
- Green
- Yellow
- Purple
- Turquoise
- Transparent
Price
At the time of purchase, I paid £12.75 for it.Feel/Weight
The stand is lightweight but sturdy.How many cupcakes will it hold?
The cake stand will comfortably hold approximately 10 regular sized cupcakes with toppings.Or you could stack regular cupcakes (with no topping) on top of one another to contain more.
You can see from the picture that there is a dip in the lid where the handle is.
What size cake will fit in the Omada Design Tray?
After playing about with my tins and trying and testing them in the stand, I found that my 7-inch x 3-inch fit best. The 8-inch x 3-inch tin was too snug and touched the sides.Will the cake stand hold a Victoria Sponge Cake?
Yes, I made an 8-inch Victoria sponge cake in sandwich tins, and it fits well on a plate within the dome without touching the top.Freshness
After having a slice of cake yesterday and simply replacing the lid, I checked the cake this morning, and it's still moist. The cake isn't sticky, either. (The cake was still fresh two days later).Conclusion
Overall I'm happy with the purchase, not only does it have a dual purpose of being both a cake stand or simple tray it is easy to clean and keeps your desserts fresh too.Where can I buy the Omada Cake Design Tray with Domed Lid?
Amazon UK
Amazon US
Last edited:
